The Firing Line Forums - View Single Post - Reloading 22-250, cases sticking in sizing die?

HiBC · June 6, 2014, 02:42 PM

The old pad lube works very well.

I have not tried the Hornady lube,but,for me,RCBS spray lube has been great.

I have a qty of brass in a tub or coffee can,spray,then shake it around to spread it.Then do that again.Pull some samples,feel them.If they are not dry,you are fine.

Now,you must give it some time for the volatile carrier to evaporate.If you do not,you will have problems.

Myself,I do not use the lube pad anymore.

June 6, 2014, 02:42 PM	#19
HiBC Senior Member Join Date: November 13, 2006 Posts: 8,283	The old pad lube works very well. I have not tried the Hornady lube,but,for me,RCBS spray lube has been great. I have a qty of brass in a tub or coffee can,spray,then shake it around to spread it.Then do that again.Pull some samples,feel them.If they are not dry,you are fine. Now,you must give it some time for the volatile carrier to evaporate.If you do not,you will have problems. Myself,I do not use the lube pad anymore.