The Firing Line Forums - View Single Post - WFT Case Trimmer and Lee Sizing Die for .223...

jeffreyulatan · March 3, 2013, 06:35 PM

I used to use the WFT trimmer a long time ago. I had the exact same problem as you. The problem was the die I was using. I adjusted it using a headspace guage, and also adjusted the WFT trimmer. It was a pain to adjust the trimmer to make it trim 1.750. Also when using that type of trimmer DO NOT FORCE the brass into the trimmer. Use light downward pressure, twist and remove.

March 3, 2013, 06:35 PM	#11
jeffreyulatan Member Join Date: October 22, 2012 Location: Guam Posts: 47	I used to use the WFT trimmer a long time ago. I had the exact same problem as you. The problem was the die I was using. I adjusted it using a headspace guage, and also adjusted the WFT trimmer. It was a pain to adjust the trimmer to make it trim 1.750. Also when using that type of trimmer DO NOT FORCE the brass into the trimmer. Use light downward pressure, twist and remove. __________________ Delta Firearms Mfg Co. 07/08 FFL SOT 2, Hobby Shop Owner