The Firing Line Forums - View Single Post

mohr308 · September 13, 2012, 02:26 AM

Well, I just spent an hour running the powdered graphite thru it, and another 10 min running the H335. There is a considerable difference in how much leaked thru, about 80% less. The one thing i did notice is, the H335 starts off pulling easy, then the pulls get harder. Im guessing thats the powder making its way in-between the 2 surfaces. If this is normal then I'm fine with that! Im used to running extruded powders, this is my first time using something so fine.

September 13, 2012, 02:26 AM	#12
mohr308 Senior Member Join Date: January 15, 2012 Location: Western New York Posts: 466	Well, I just spent an hour running the powdered graphite thru it, and another 10 min running the H335. There is a considerable difference in how much leaked thru, about 80% less. The one thing i did notice is, the H335 starts off pulling easy, then the pulls get harder. Im guessing thats the powder making its way in-between the 2 surfaces. If this is normal then I'm fine with that! Im used to running extruded powders, this is my first time using something so fine. __________________ Lock and load, the zombies (democrats) are coming (to take your guns)!