The Firing Line Forums - View Single Post - Savage 111 W/ Accutrigger rear tang question

**Unclenick** · November 17, 2008, 08:20 PM

The plastic factory stock has molded-in pillars. If the receiver is firmly against the pillars, the tang will normally float. If they didn't set it up that way, the tang's contact with the stock would prevent the receiver from seating solidly on the pillars.

November 17, 2008, 08:20 PM	#2
Unclenick Staff Join Date: March 4, 2005 Location: Ohio Posts: 21,063	The plastic factory stock has molded-in pillars. If the receiver is firmly against the pillars, the tang will normally float. If they didn't set it up that way, the tang's contact with the stock would prevent the receiver from seating solidly on the pillars. __________________ Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle