The Firing Line Forums - View Single Post

James K · April 2, 2011, 08:07 PM

Yes, M3x0.6 is a standard size and taps and dies are readily available, so you might be able to make a screw with minimal expense if you can't find one.

Jim

April 2, 2011, 08:07 PM	#11
James K Member In Memoriam Join Date: March 17, 1999 Posts: 24,383	Yes, M3x0.6 is a standard size and taps and dies are readily available, so you might be able to make a screw with minimal expense if you can't find one. Jim