Quote:
If you want to be thrifty buy a .380 sizer and you can use the 9mm flare and seating die.
|
No, you can't. That's where it would come to a screeching halt.
The plunger on the flaring die is too long to flare the case, it will hit bottom first. Depending on the chamber the case was shot from last the resizing die would probably make it fit a 380 barrel one time.
The flaring die will be the fly in the ointment. Sufficient neck tension will be the next runner up from not getting it into the resizing die far enough from the 380 being to short.