|
CAUTION: The following post includes loading data beyond currently published maximums for this cartridge. USE AT YOUR OWN RISK. Neither the writer, The Firing Line, nor the staff of TFL assume any liability for any damage or injury resulting from use of this information
Yes this is a 1911...wouldnt dare shoot this out of a glock....Im using 11.5 gr of HS-6 in super cases with 250 gr xtp hornady hollow points...used the chrony and it said it was movin a little over 1200 fps...i found the load in a magazine...it said that the state troopers in fairbanks use a slightly differnt load using 9.5 grains...we slowly worked up for an even hotter load watching for pressure signs and such...apparently the pressures are at around 29000 - 30000 psi where as the 1911 is rigged for 35000...i wouldnt dare go any higher than this but i wanted to see what everyones oppinion was on what i have accomplished...
Osirus101
|