The Firing Line Forums - View Single Post - 6.5-06 petloads

Jimro · June 23, 2012, 08:23 AM

When necking down just make sure that your neck diameter isn't too thick for your chamber and you'll be fine. You probably don't have to worry about that if you use 270 Win or 280 Rem brass to form into 6.5-06, and you don't have to worry if you start with 25-06 brass and neck up.

I don't have any pet loads to give you, as I passed on a 6.5-06 a few years back at a gunshow. But you can find data all over the internet on that round.

Jimro

June 23, 2012, 08:23 AM	#2
Jimro Senior Member Join Date: October 18, 2006 Posts: 7,097	When necking down just make sure that your neck diameter isn't too thick for your chamber and you'll be fine. You probably don't have to worry about that if you use 270 Win or 280 Rem brass to form into 6.5-06, and you don't have to worry if you start with 25-06 brass and neck up. I don't have any pet loads to give you, as I passed on a 6.5-06 a few years back at a gunshow. But you can find data all over the internet on that round. Jimro __________________ Machine guns are awesome until you have to carry one.