Well Bacchus there is no getting around the fact tht you have to lube em...........not everyone mind you but at least 1 or 2 out of 3. I have been using some Lyman spray and its ok. Not as slick as RCBS lube but ok. Got to spray everyone too but it dries and is not messy.
I never really had a "slow down" problem when I use the lube pad either. Just make sure you don't get it on too thick or you will get lube dents on the shoulder.
Withoug knowing if the bullet is too tight or too loose in the case I can't really answer about the sizing but I suspect the die needs adjusting. Read the instructions close and see if that may be the problem.
|