The Firing Line Forums - View Single Post

robertcarr · October 10, 2000, 04:42 PM

I reload for my CZ-85 which is basically the same as the -75, with ambidextrous controls.

I have loaded 147 gr. plated RN bullets from Berry's with 6.6 gr. of AA-7. I'm now using 124 gr. plated HP's from Berry's with 4.4 Gr. of TiteGroup. Very accurate round. I initially had a problem due to the OAL being too long, the bullet noses were being pushed into the rifling. I set the seater for 1.040" OAL and they work fine.

I do use the Lee Factory Crimp die in station 4 of my 550B. Dillon dies everyplace else.

Bob Carr
Layton, Utah

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by bullet44:
Does anyone on the board reload for the 9mm cz75b.? I purchased a cz and am having problems getting my reloads to function,
while factory ammo works fine.I have checked
all measuments can find nothing wrong,only
difference I using lead bullets vs.the factory fmj. The chamber seems very tight
anyone else have this with the cz.?[/quote]

October 10, 2000, 04:42 PM	#4
robertcarr Junior Member Join Date: August 31, 2000 Posts: 8	I reload for my CZ-85 which is basically the same as the -75, with ambidextrous controls. I have loaded 147 gr. plated RN bullets from Berry's with 6.6 gr. of AA-7. I'm now using 124 gr. plated HP's from Berry's with 4.4 Gr. of TiteGroup. Very accurate round. I initially had a problem due to the OAL being too long, the bullet noses were being pushed into the rifling. I set the seater for 1.040" OAL and they work fine. I do use the Lee Factory Crimp die in station 4 of my 550B. Dillon dies everyplace else. Bob Carr Layton, Utah <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by bullet44: Does anyone on the board reload for the 9mm cz75b.? I purchased a cz and am having problems getting my reloads to function, while factory ammo works fine.I have checked all measuments can find nothing wrong,only difference I using lead bullets vs.the factory fmj. The chamber seems very tight anyone else have this with the cz.?[/quote]