View Single Post
Old December 4, 1999, 04:16 PM   #4
umstud
Member
 
Join Date: July 19, 1999
Posts: 31
Matrix, I was faced with the same problem when I bought my reloading press. After getting advice from many experienced loaders on TFL I decided to try something novel. I have a row of bookshelves built into the closet of a bedroom that I converted to a study. I bolted the Dillon 550B to the shelf immediately above the double door cabinet on the bookshelf and relocated the books that were there. I removed all the books from the shelf above and used that shelf for my supplies. I made sure to bolt the press down a little to one side so that I could still open one of the doors. This way I can still have access to the shelves behind the doors. Everything worked out perfect. I can load in the privacy of my study and I am not isolated in the garage or basement(for those who have a basement), and I did not have to find any extra floor space. This setup is just perfect for me
umstud is offline  
 
Page generated in 0.02056 seconds with 8 queries