The Firing Line Forums - View Single Post

mete · August 28, 2012, 09:44 AM

The clamp is to make sure the sight is seated all the way down. Start the hole with an undersize drill ,then redrill with one that will require light tapping to seat the pin .Then it's there properly.

August 28, 2012, 09:44 AM	#3
mete Senior Member Join Date: June 14, 2004 Location: NY State Posts: 6,575	The clamp is to make sure the sight is seated all the way down. Start the hole with an undersize drill ,then redrill with one that will require light tapping to seat the pin .Then it's there properly. __________________ And Watson , bring your revolver !