View Single Post
Old May 7, 2009, 10:55 PM   #460
HUBEL458
Senior Member
 
Join Date: March 8, 2000
Posts: 751
You want to get a Zabala 10 ga just like Rob is using
in the pics above. You get the one with Greener crossbolt.
With 10ga you can make the 577 insert with thicker sidewalls.
It will take any load that the 577 cases can hold.

I fired mono-blocked NEF this week with a 585HE 32"
barrel and the gun is weighted to 15 lbs. Thick pad.
I have cone breech as this case is belted with thick base.
I'll have a pic of gun later. Gun is still tight after testing.
I can take out cases with my fingers as they don't stick.
First 650gr, with no extractor. The HBMG, WC-860,AA8700,
Retumbo, Magpro, RE25, W-780 loads come out of the chamber,
with my fingers.If I tip gun up they fall out.
Top speed with RE25 and W-780 is over 2400. Now I knew what
to load them at because I have tested this case in 3 other guns.
I have all the different powders and bullets tested.
This is example of a case extracting easy,
due to proper side taper that my 585 has....Ed
__________________
ED HUBEL
HUBEL458 is offline  
 
Page generated in 0.04972 seconds with 8 queries