The Firing Line Forums - View Single Post - loads for 9mm using IMR 700-X, help

craig2724 · September 13, 2009, 09:04 PM

If I did the math right according to the Hodgdon charts I have, if I up the load to 4.0 grains the velocity should be 1170. That will be a reasonable velocity to stop at.

Thanks for your help.

September 13, 2009, 09:04 PM	#11
craig2724 Member Join Date: September 12, 2009 Posts: 18	If I did the math right according to the Hodgdon charts I have, if I up the load to 4.0 grains the velocity should be 1170. That will be a reasonable velocity to stop at. Thanks for your help.