View Single Post
Old February 26, 2013, 07:52 AM   #4
mulespurs
Senior Member
 
Join Date: February 26, 2012
Posts: 115
Check this while you are at it

I think that the answer to your problem may be very simple. My ar-15 had exactly the same problem that you describe. The problem may be the j-spring in the hammer pivot hole. It is not listed seperately anywhere that I have found.

This spring is only maybe 1/2 inch long, J shaped and should protrude into the hammer pivot hole. supposedly this spring is rivited in the hammer and should not fall out during dissasembly.
Mine did and caused quite a headache.
I pulled one out of another hammer, installed it and problem solved.
Try a different hammer if nothing else. Let me know if this works.
Later.
mulespurs is offline  
 
Page generated in 0.02772 seconds with 8 queries