The Firing Line Forums - View Single Post

10-96 · September 30, 2012, 01:15 AM

Try this:
Push in on the mag catch button as far as it will go (may need to use a plastic or nylon punch). Now on the left side of the rifle, see if you can rotate the flat portion of the mag catch 360 degrees clockwise.

It sounds like your mag catch wasn't installed properly (screwed on far enough) to engage the catchy portion of most of your clips.

September 30, 2012, 01:15 AM	#7
10-96 Senior Member Join Date: October 19, 2005 Location: Tx Panhandle Territory Posts: 4,159	Try this: Push in on the mag catch button as far as it will go (may need to use a plastic or nylon punch). Now on the left side of the rifle, see if you can rotate the flat portion of the mag catch 360 degrees clockwise. It sounds like your mag catch wasn't installed properly (screwed on far enough) to engage the catchy portion of most of your clips. __________________ Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day) I suspect a thing or two... because I've seen a thing or two.