View Single Post
Old April 28, 2013, 08:47 AM   #6
Dixie Gunsmithing
Moderator Emeritus
 
Join Date: April 27, 2013
Location: Ohio
Posts: 1,923
If the spring is still there, you might try being a small bow in it, in the direction that it applies pressure. A lot of times, that's all that's needed. Another thing to check, is that the springs recess is not dirty, or the spring is rubbing, which may have to be cleared.
Dixie Gunsmithing is offline  
 
Page generated in 0.03672 seconds with 8 queries