Quote:
|
Originally Posted by spacecoast
The instructions mention rubbing the outside of the case with lubed fingers and using Q-tips for the inside. I guess I'll be forgoing the inside, seems like a lot of time saved also.
|
That is for rifle reloading. The only pistol brass I have lubed at all has been .460 S&W and only on the outside. When you resize rifle brass, the decapping pin will also have a neck sizer part which takes the place of the pistol expander die. That's why you lube the inside of the rifle brass, is for the neck sizer.
When doing rifle I used a lube pad and rolled the brass on it and about every third round would run the my finger over the case mouth and it would pick up the lube on my fingers and lube the neck sizer.