View Single Post
Old August 30, 2000, 01:53 PM   #3
Johnny Guest
Moderator in Memoriam
 
Join Date: August 28, 1999
Location: North Texas
Posts: 4,123
rezman--
I use combination of your method and beemerb's--I like the Dillon spray-on, and I also single-stage for sizing. I like the vibatory case cleaner better than wiping down the cases on at a time. I usually trim cases in a separate operation, and de-burr them. Then comes the progressive.

I sometimes put in an oversize sizing die, backed WAY out, with an undersized expander in it, and use the decapping for the sole purpose of making sure there is no cleaning media particles in the flash hole. This is sometmes a bit too much trouble, so I simply inspect carefully and use a leather awl to clear the flash hole.

I go ahead and prime at station one.

All kinds of ways to skin a cat. (What are household feline pelts selling for these days?)

Best,
Johnny


------------------
---The Second Amendment ensures the rest of the Bill of Rights---

[This message has been edited by Johnny Guest (edited August 30, 2000).]
Johnny Guest is offline  
 
Page generated in 0.02395 seconds with 8 queries