The Firing Line Forums - View Single Post - Using a Hornady and RCBS powder measure on a Dillon 550B?

wogpotter · October 12, 2012, 10:43 AM

Yes you can, but with varying degrees of difficulty on connecting to the auto powder dump system.

There is an adaptor that lets you use any standard powder measure with Dillon's existing die. You leave the die in place as you would with Dilon's measure, attach the adaptor to the upper part of the die & then screw the powder meter into the upper section one of several "mouth adaptors" to fit the meter to the adaptor.

October 12, 2012, 10:43 AM	#3
wogpotter Senior Member Join Date: September 27, 2004 Posts: 4,811	Yes you can, but with varying degrees of difficulty on connecting to the auto powder dump system. There is an adaptor that lets you use any standard powder measure with Dillon's existing die. You leave the die in place as you would with Dilon's measure, attach the adaptor to the upper part of the die & then screw the powder meter into the upper section one of several "mouth adaptors" to fit the meter to the adaptor. __________________ Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”? Elderly Hunter: “That's dashed unsporting. Probably Belgium.”