The Firing Line Forums - View Single Post

hounddawg · November 7, 2012, 06:30 PM

use the method I described above, see if it the case or the bullet causing the issue. After switching from a single stage to a progressive I forgot to tweak in the crimp and had to go back and recrimp a batch becasue of chambering problems. Oh and I have to seat My MBC 125 LRNS .001 - .002 under the OAL specs as well. If you do that start with a minimum load and work up checking for pressure signs etc etc

November 7, 2012, 06:30 PM	#17
hounddawg Senior Member Join Date: March 1, 2009 Posts: 4,232	use the method I described above, see if it the case or the bullet causing the issue. After switching from a single stage to a progressive I forgot to tweak in the crimp and had to go back and recrimp a batch becasue of chambering problems. Oh and I have to seat My MBC 125 LRNS .001 - .002 under the OAL specs as well. If you do that start with a minimum load and work up checking for pressure signs etc etc __________________ “How do I get to the next level?” Well, you get to the next level by being the first one on the range and the last one to leave.” – Jerry Miculek