The Firing Line Forums - View Single Post

Adamantium · July 21, 2012, 08:29 PM

What powder?

Also you can use any published data for any 124/125 grain jacketed bullet. Some people seek out specific recipes for bullets, primers and brands of brass but there is no safety hazards for using bullets/brass/primers as generic components. Just do a load work up, which should be done anyway.

My accurate manual recommends an OAL of 1.06" for the 124 XTP in 9mm but most people load them longer than that and have no problems.

July 21, 2012, 08:29 PM	#2
Adamantium Senior Member Join Date: June 6, 1999 Location: El Paso, TX Posts: 1,021	What powder? Also you can use any published data for any 124/125 grain jacketed bullet. Some people seek out specific recipes for bullets, primers and brands of brass but there is no safety hazards for using bullets/brass/primers as generic components. Just do a load work up, which should be done anyway. My accurate manual recommends an OAL of 1.06" for the 124 XTP in 9mm but most people load them longer than that and have no problems. __________________ New gun, same ol' shot.