The Firing Line Forums - View Single Post

hogdogs · November 29, 2012, 05:09 PM

PASS FOR NOW!!! A 2 3/4 shell that is UNFIRED will fit as the length indicates FIRED and when fired, the hull will open into the forcing cone in front of the chamber and this reduces the required diameter thus pressure would spike in a short chamber.

Here is a "chamber gauge" this is all you need to measure...

http://www.csmcspecials.com/Handy_Mo...ge_p/t0321.htm

If you trust your own eyes and ability... it may serve your needs fine...

Brent

November 29, 2012, 05:09 PM	#7
hogdogs Staff In Memoriam Join Date: October 31, 2007 Location: Western Florida panhandle Posts: 11,069	PASS FOR NOW!!! A 2 3/4 shell that is UNFIRED will fit as the length indicates FIRED and when fired, the hull will open into the forcing cone in front of the chamber and this reduces the required diameter thus pressure would spike in a short chamber. Here is a "chamber gauge" this is all you need to measure... http://www.csmcspecials.com/Handy_Mo...ge_p/t0321.htm If you trust your own eyes and ability... it may serve your needs fine... Brent