The Firing Line Forums - View Single Post

GURU1911 · April 20, 2011, 10:56 PM

1. Secure strut end in smooth jaw vise or pad jaws with wood.
2. Push down on spring retainer plate with a pair of square jaw pliers.
3. Remove pin, punch, or paper clip you used to retain the spring, from the strut.
4. Gently release pressure on the pliers.
5. Remove old spring & install new one.
6. Reverse these steps for the install.

Guru1911

April 20, 2011, 10:56 PM	#3
GURU1911 Senior Member Join Date: December 22, 2010 Location: SEALY, THE REPUBLIC OF TEXAS Posts: 501	Ruger bh hammer spring 1. Secure strut end in smooth jaw vise or pad jaws with wood. 2. Push down on spring retainer plate with a pair of square jaw pliers. 3. Remove pin, punch, or paper clip you used to retain the spring, from the strut. 4. Gently release pressure on the pliers. 5. Remove old spring & install new one. 6. Reverse these steps for the install. Guru1911 __________________ NRA LIFE MEMBER (1984) & PRESIDENT: S.W. LA. R&P CLUB, LAKE CHARLES, LOUISIANA (1994-1999) METALLIC CARTRIDGE RELOADER (1977) & GENTILE CHRISTIAN ZIONIST INFIDEL !!! "THERE AIN'T TOO MANY THINGS THAT YOU CAN'T FIX, WITH $500 DOLLARS OR A .30-06"