The Firing Line Forums - View Single Post - Opinions top-end die sets over standard sets.

Jimro · January 27, 2013, 01:53 PM

If you are going to use a micrometer style seater die, you really need to be measuring your chamber. Those seater dies are great when you are "chasing the lands" to maintain a consistent jump for your match bullets as the throat wears.

But then again, if you are chasing the lands of your throat, you are competing at a level where you need a 150 dollar seating die.

Jimro

January 27, 2013, 01:53 PM	#19
Jimro Senior Member Join Date: October 18, 2006 Posts: 7,097	If you are going to use a micrometer style seater die, you really need to be measuring your chamber. Those seater dies are great when you are "chasing the lands" to maintain a consistent jump for your match bullets as the throat wears. But then again, if you are chasing the lands of your throat, you are competing at a level where you need a 150 dollar seating die. Jimro __________________ Machine guns are awesome until you have to carry one.