This has been discussed before.
The gist is:
Rifle primers are; harder, hotter and sometimes longer.
Yes, in some cases, during the load building process, rifle primers could be used (if they will seat deep enough in the primer pocket and the weapon has enough fall to ignite them). Just don't switch back and forth indiscriminately. The results could/would be greater than switching between standard strength and magnum strength primers.
If that's all you have or can get, try it but work your loads slowly and with great care. It appears that powder is loosing up a little. I suspect primers will also.
Always error on the side of safety,
OSOK
|