The Firing Line Forums - View Single Post - Need Help with my Hornady Lock n Load Press

Shoney · September 11, 2010, 05:37 AM

beertv

WELCOME TO TFL!!!

You have an excellent press, I've had mine around 10 years. I am not familiar with the setup of the case feeder attachment into station 1.

On all the LNL AP's that I have seen and used, guides feed the spring under the plate between station 5 and 1, to allow the cases to be inserted at station 1. It then comes up to hold the cases in place for priming (station 1/2 if you will) and for stations 2-4 and begins to go under the plate at station 5.

If you have troubles, do not hesitate to call Hornady Customer Service, the toll free number should be in your manual.

Good Shooting!

September 11, 2010, 05:37 AM	#2
Shoney Senior Member Join Date: February 21, 2002 Location: Transplanted from Montana Posts: 2,311	beertv WELCOME TO TFL!!! You have an excellent press, I've had mine around 10 years. I am not familiar with the setup of the case feeder attachment into station 1. On all the LNL AP's that I have seen and used, guides feed the spring under the plate between station 5 and 1, to allow the cases to be inserted at station 1. It then comes up to hold the cases in place for priming (station 1/2 if you will) and for stations 2-4 and begins to go under the plate at station 5. If you have troubles, do not hesitate to call Hornady Customer Service, the toll free number should be in your manual. Good Shooting! __________________ I pledge allegiance to the Flag - - -, and to the Republic for which it stands….Our Forefathers were brilliant for giving us a Republic, not a democracy! Do you know the difference??? and WHY?http://www.wallbuilders.com/LIBissue...les.asp?id=111