The Firing Line Forums - View Single Post

drail · February 24, 2012, 02:15 PM

Try the ATF (Dexron)/acetone soak. It really works. When you replace the bolt put a little anti seize compound on the threads. Any time you run a steel fastener into alum. threads anti seize compound will save you down the road. Ask any biker or aircraft mechanic. Anti seize compound should be available at any auto parts store.

February 24, 2012, 02:15 PM	#15
drail Junior member Join Date: February 2, 2008 Posts: 3,150	Try the ATF (Dexron)/acetone soak. It really works. When you replace the bolt put a little anti seize compound on the threads. Any time you run a steel fastener into alum. threads anti seize compound will save you down the road. Ask any biker or aircraft mechanic. Anti seize compound should be available at any auto parts store.