The Firing Line Forums - View Single Post

JRLSH · February 15, 2013, 10:39 AM

Snuffy, (et al), I was just thinking that. I didn't give enough info about the rifle and all. It is a Bushmaster bolt gun. Case was FLS, primer pocket reamed(primer pocket uniforming tool from K&M) and seated with a CCI#35 primer and loaded with Lee dies on a single stage press. I am very meticulous in my methods(cleanliness, measure twice, measure each powder charge/load on a scale, and yes, I do remove the crimp( or at least try to) on all LC cases. Sorry for the spotty info. Also, it is a LC08 case and was loaded with 210gr of WC860 with a 650 gr M33 ball bullet.

February 15, 2013, 10:39 AM	#3
JRLSH Member Join Date: October 26, 2011 Posts: 35	Yep, my bad Snuffy, (et al), I was just thinking that. I didn't give enough info about the rifle and all. It is a Bushmaster bolt gun. Case was FLS, primer pocket reamed(primer pocket uniforming tool from K&M) and seated with a CCI#35 primer and loaded with Lee dies on a single stage press. I am very meticulous in my methods(cleanliness, measure twice, measure each powder charge/load on a scale, and yes, I do remove the crimp( or at least try to) on all LC cases. Sorry for the spotty info. Also, it is a LC08 case and was loaded with 210gr of WC860 with a 650 gr M33 ball bullet. __________________ JRL____________ If you heard the bang, You weren't the target. Last edited by JRLSH; February 15, 2013 at 10:46 AM.