The Firing Line Forums - View Single Post

jrfoxx · September 3, 2008, 01:15 PM

Agreed. Feel free to be rought with the bolt, as I suspect you'll be VERY hard pressed to hurt it (unless you are Chuck Norris, then all bets are off, obviously, but I know you arent, as Chuck has no need for a gun, since he can just throw a kick to within 10 feet of you, and the resulting pressure wave will can anyone nearby, so...

)

Mines the same way, just work the bolt like you mean it, and you'll never even notice the slight extra bit in that spot. Still a pretty easy bolt to work, and certainly not nearly as bad as a Mosin.

September 3, 2008, 01:15 PM	#7
jrfoxx Senior Member Join Date: August 20, 2004 Location: Evanston,WY Posts: 898	Agreed. Feel free to be rought with the bolt, as I suspect you'll be VERY hard pressed to hurt it (unless you are Chuck Norris, then all bets are off, obviously, but I know you arent, as Chuck has no need for a gun, since he can just throw a kick to within 10 feet of you, and the resulting pressure wave will can anyone nearby, so...) Mines the same way, just work the bolt like you mean it, and you'll never even notice the slight extra bit in that spot. Still a pretty easy bolt to work, and certainly not nearly as bad as a Mosin. __________________ Q: How can I reduce the amount of mail I receive from the NRA? A: Simply email us at [email protected] or dial 800-NRA-3888 and request to be placed on the "Do Not Promote" list.