The Firing Line Forums - View Single Post

gaowlpoop · June 26, 2007, 07:35 AM

Here are a few pictures of the brass catcher I built. It is all Schedule 20 (pressure rated) ¾ inch PVC pipe. I glued all of the joints together except the legs. The cloth is just some scraps my wife had. The cloth is attached with clips I made by simply making one cut along the length of a piece of pipe and then cutting off short sections. If you decide to build something like this, give yourself plenty of cloth. If you stretch it tight, the casings will bounce back out.

June 26, 2007, 07:35 AM	#5
gaowlpoop Junior member Join Date: April 21, 2007 Posts: 7	Here are a few pictures of the brass catcher I built. It is all Schedule 20 (pressure rated) ¾ inch PVC pipe. I glued all of the joints together except the legs. The cloth is just some scraps my wife had. The cloth is attached with clips I made by simply making one cut along the length of a piece of pipe and then cutting off short sections. If you decide to build something like this, give yourself plenty of cloth. If you stretch it tight, the casings will bounce back out.