|
Sawbones, if you are talking about a bolt-action rifle, the following works with no equipment whatsoever. If you are already familiar with this, I apologize for stating the obvious.
1. Get the rifle real steady on lots of sandbags or equivalent.
2. Remove the bolt so you can look right through the bore.
3. Adjust the rifle/sandbags combo, etc., until you look right through the bore onto the Point of Impact you want. Make sure everything is steady!
4. Adjust the crosshairs on the scope until thay are at the same point as your bore is pointing.
5. Replace the bolt and fire to check. You should be pretty close.
Worked real well for me the first time I tried.
|