View Single Post
Old May 4, 2000, 10:52 PM   #8
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 16,930
Not really. Just be aware that all casings are not made equal. Some have thicker walls than others. This causes a smaller case capacity so pressures can be higher, all other factors being equal. So if you start pushing the envelope with your loads (especially rifle cartridges) you might create an over pressure round with one headstamp when it was within specs for another.
Mal H is offline  
 
Page generated in 0.02164 seconds with 8 queries