The Firing Line Forums - View Single Post - Repros of original colt style brass bullet molds

Doc Hoy · January 27, 2010, 07:27 AM

Model P,

Yes...As long as the handles are insulated from the molds. Made out of wood or such.

To Bedbug,

My disadvantage is that for all of the years I have been shooting, (I started about 35 years ago but took a long break until about five years ago) I have always shot alone. Never with a club. Consequently, the things I learned, I learned on my own without any pointers from more knowledgable shooters.

I am sure I have made mistakes for years without realizing they were mistakes. I have also probably formed some bad habits. As an example, I always load all six chambers never leaving a safe chamber. Some others might be horrified. It is just a habit.

All that changed when I started participating in this forum.

January 27, 2010, 07:27 AM	#5
Doc Hoy Senior Member Join Date: October 24, 2008 Location: Naples, Fl Posts: 5,440	Both of you guys Model P, Yes...As long as the handles are insulated from the molds. Made out of wood or such. To Bedbug, My disadvantage is that for all of the years I have been shooting, (I started about 35 years ago but took a long break until about five years ago) I have always shot alone. Never with a club. Consequently, the things I learned, I learned on my own without any pointers from more knowledgable shooters. I am sure I have made mistakes for years without realizing they were mistakes. I have also probably formed some bad habits. As an example, I always load all six chambers never leaving a safe chamber. Some others might be horrified. It is just a habit. All that changed when I started participating in this forum. __________________ Seek truth. Relax. Take a breath.