View Single Post
Old August 31, 2011, 10:08 AM   #8
tobnpr
Senior Member
 
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 4,556
^^
7.62 NATO and .308 are NOT the same. Potentially higher pressures with the .308, and larger headspace of the NATO chamber can be an issue.

This explains it:

"Before we go much further, we want to address the oft-posed question “are the .308 Winchester and 7.62×51 NATO one and the same.” The simple answer is no. There are differences in chamber specs and maximum pressures. The SAMMI/CIP maximum pressure for the .308 Win cartridge is 62,000 psi, while the 7.62×51 max is 50,000 psi. Also, the headspace is slightly different. The .308 Win “Go Gauge” is 1.630″ vs. 1.635″ for the 7.62×51. The .308′s “No-Go” dimension is 1.634″ vs. 1.6405″ for a 7.62×51 “No Go” gauge. That said, it is normally fine to shoot quality 7.62×51 NATO ammo in a gun chambered for the .308 Winchester (though not all NATO ammo is identical). Clint McKee of Fulton Armory notes: “[N]obody makes 7.62mm (NATO) ammo that isn’t to the .308 ‘headspace’ dimension spec. So 7.62mm ammo fits nicely into .308 chambers, as a rule.” You CAN encounter problems going the other way, however. A commercial .308 Win round can exceed the max rated pressure for the 7.62×51. So, you should avoid putting full-power .308 Win rounds into military surplus rifles that have been designed for 50,000 psi max."
tobnpr is offline  
 
Page generated in 0.03267 seconds with 8 queries