|
I tried your suggestions, broke it all down soaked everything put it all back together and still doing it. nothing about the problem makes sense. it's like in DA mode the hammer is hitting something rather than the firing pin. I measured with a dial caliper how far back the hammer goes before releasing and it's fully cocking and releasing but still no firing pin strike. guess I'll have to take the expensive route and order all new springs, firing pin etc. could the magazine safety be causing the problem ? doesn't it block the hammer from moving if the magazine isn't in the gun ? it might be broke/malfunctioning and causing some weird problem honestly don't know what else would block the hammer from hitting the firing pin other than the safety but it can't find anything wrong with that.
|