The Firing Line Forums - View Single Post

918v · February 25, 2006, 01:26 PM

I don't recommend it.

If you use the proper diameter lead bullet in your semi, the FCD will reduce that diameter during the crimping process. Now you have an undersized bullet.

There is no need for the FCD. A properly adjusted seater coupled with a properly adjusted standard crimp die works fine.

February 25, 2006, 01:26 PM	#18
918v Junior member Join Date: September 25, 2005 Posts: 1,372	I don't recommend it. If you use the proper diameter lead bullet in your semi, the FCD will reduce that diameter during the crimping process. Now you have an undersized bullet. There is no need for the FCD. A properly adjusted seater coupled with a properly adjusted standard crimp die works fine.