The Firing Line Forums - View Single Post

**Mal H** · February 19, 2000, 01:39 AM

If you find you need to lube the inside of your case necks, use "motor mica" instead of case lube. Regular case lube is difficult to remove from the inside of the neck.

Have you been able to compare all dimensions of one of the bad cases to a good one, or even better, a factory load? Your 2.800 OAL should give plenty of clearance for the 168 HPBT.

February 19, 2000, 01:39 AM	#6
Mal H Staff Join Date: March 20, 1999 Location: Somewhere in the woods of Northern Virginia Posts: 16,955	If you find you need to lube the inside of your case necks, use "motor mica" instead of case lube. Regular case lube is difficult to remove from the inside of the neck. Have you been able to compare all dimensions of one of the bad cases to a good one, or even better, a factory load? Your 2.800 OAL should give plenty of clearance for the 168 HPBT.