The Firing Line Forums - View Single Post

Tom-C · October 9, 2010, 01:42 PM

fishhead1

Use a hardwood drift and tap the sight out. Cut a shim out of a soda or beer can to the same size as the base of the sight. The wall thickness is .004 to .0045 and one usually is enough, but you can try two.

October 9, 2010, 01:42 PM	#2
Tom-C Member Join Date: July 25, 2008 Posts: 45	fishhead1 Use a hardwood drift and tap the sight out. Cut a shim out of a soda or beer can to the same size as the base of the sight. The wall thickness is .004 to .0045 and one usually is enough, but you can try two.