View Single Post
Old August 29, 2006, 02:27 AM   #2
thales
Member
 
Join Date: January 13, 2006
Posts: 20
*


The ejector in the photo appears undamaged. The first thing I would do is strip the slide and clean it thoroughly, paying particular attention to the extractor and its spring, plunger and plunger channel. In the process, inspect the extractor hook carefully with a strong magnifying glass for chips or wear. If the problem persists after that, try a new, OEM recoil spring.


*
thales is offline  
 
Page generated in 0.03363 seconds with 8 queries