View Single Post
Old April 20, 2013, 09:44 AM   #4
Slamfire
Senior Member
 
Join Date: May 27, 2007
Posts: 5,261
Fifty five grains of IMR/AA or H4350 with a 168 or 175 is an excellent target load in a 30-06 bolt gun. I have shot ammunition cans of the stuff out to 600 yards and shot HM scores with that load. The differences between brands of 4350 is slight, if you were developing a maximum load then you would have to pay attention to the lot to lot differences, but at this load level, pushing a bullet just at 2700 fps, that is probably below 50,000 psia with every brand of 4350.

For future reference, if you ever plan to shoot this in a Garand, this powder is not appropriate for use in a Garand. Port pressures would be too high. IMR 3031 has an appropriate curve for a gas gun it will also shoot very well in the 30-06 with a 168.


M70 26" Douglas Barrel

168 gr Sierra 2nds 55.0 H4350 RA54 Fed210M

27 July 97 T = 88F

Ave Vel = 2678
Std Dev = 36
ES = 78
Low = 2635
High = 2713
N = 7


M98 26" 1-10 Wilson Barrel

175 gr Sierra 55.0grs AA4350 wtd. FED 210M W/W cases OAL 3.30"

5 Oct 2000 T=70° F

Ave Vel = 2710
Std Dev = 18
ES = 43
Low = 2679
High = 2722
N = 5
Group Size: Excellent group, rounded primers
__________________
If I'm not shooting, I'm reloading.

Last edited by Slamfire; April 20, 2013 at 01:17 PM.
Slamfire is offline  
 
Page generated in 0.03099 seconds with 8 queries