The Firing Line Forums - View Single Post

Scorch · June 25, 2012, 12:46 PM

Easiest fix: drill all the holes out to the next larger size, typically 8-40. You may have to modify the mounts for clearance.

If there are specific reasons you do not want to drill the action to the next larger size, you can have the hole in the rear receiver bridge filled/welded and re-drilled. Don't try this on the front receiver ring.

June 25, 2012, 12:46 PM	#2
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	Easiest fix: drill all the holes out to the next larger size, typically 8-40. You may have to modify the mounts for clearance. If there are specific reasons you do not want to drill the action to the next larger size, you can have the hole in the rear receiver bridge filled/welded and re-drilled. Don't try this on the front receiver ring. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services