The Firing Line Forums - View Single Post

chris in va · November 13, 2011, 12:05 PM

FYI, the Lee 358-125-RF mold drops at 362 (at least mine does). I use it in my CZ 9mm after sizing it back down to 358. Just thought I'd warn you.

None of the 'tumble lube' bullet designs have worked for me. I recommend you just get a regular mold, get the inexpensive sizing die if necessary and tumble lube those with Johnson's Paste Wax and 10% mineral spirits.

November 13, 2011, 12:05 PM	#8
chris in va Senior Member Join Date: December 26, 2004 Location: Louisville KY Posts: 13,806	FYI, the Lee 358-125-RF mold drops at 362 (at least mine does). I use it in my CZ 9mm after sizing it back down to 358. Just thought I'd warn you. None of the 'tumble lube' bullet designs have worked for me. I recommend you just get a regular mold, get the inexpensive sizing die if necessary and tumble lube those with Johnson's Paste Wax and 10% mineral spirits.