The Firing Line Forums - View Single Post - Hornady L-N-L indexes too far

WhistlerSWE · July 25, 2009, 03:23 AM

FORKLIFT352: Might help with what? The indexing problem has been resolved. Which issue are you referring to?

I might as well tell that I have also figured out what was causing the inconsistent case OAL. I wanted 28.6mm but got all from 28.3mm to 28.8mm. What I did wrong was not having casings in all the slots. When I put a casing on every slot and made sure all stations where engaged when seating the bullet I got perfect 28.6mm every time. I measured 50 cases in a row and they where perfect!

Though now I have a 15 or so to pull with the kinetic hammer, it took a while to adjust the correct OAL.

July 25, 2009, 03:23 AM	#15
WhistlerSWE Member Join Date: November 14, 2008 Location: Sweden Posts: 70	FORKLIFT352: Might help with what? The indexing problem has been resolved. Which issue are you referring to? I might as well tell that I have also figured out what was causing the inconsistent case OAL. I wanted 28.6mm but got all from 28.3mm to 28.8mm. What I did wrong was not having casings in all the slots. When I put a casing on every slot and made sure all stations where engaged when seating the bullet I got perfect 28.6mm every time. I measured 50 cases in a row and they where perfect! Though now I have a 15 or so to pull with the kinetic hammer, it took a while to adjust the correct OAL.