The Firing Line Forums - View Single Post - 10/22 Magazine Movement Causing Failure to Feed

arcticap · September 19, 2012, 07:25 PM

I had a similar feeding problem with a Choate .30 carbine plastic stock until the action was returned to the original stock. It was a 10/22 built in the 1980's.

Click on the peel-away shims from McMaster-Carr to check them out:

http://www.mcmaster.com/#round-shims/=jd6qa6

http://www.mcmaster.com/#round-shims/=jd6q22

September 19, 2012, 07:25 PM	#14
arcticap Senior Member Join Date: March 15, 2005 Location: Central Connecticut Posts: 3,166	I had a similar feeding problem with a Choate .30 carbine plastic stock until the action was returned to the original stock. It was a 10/22 built in the 1980's. Click on the peel-away shims from McMaster-Carr to check them out: http://www.mcmaster.com/#round-shims/=jd6qa6 http://www.mcmaster.com/#round-shims/=jd6q22 Last edited by arcticap; September 19, 2012 at 07:31 PM.