The Firing Line Forums - View Single Post

darkgael · December 5, 2012, 09:37 PM

What he said ^^^^.
Add this idea. Instead of a snap cap, put a sharpened lead pencil into the barrel. Full length wooden pencil with a full eraser. Drop it in through the muzzle. The eraser should rest against the breech/firing pin hole. Stand so that the point of the pencil is about 1/2" from the paper. When you dry fire, the firing pin will pop the pencil forward, leavingma dot on the paper In addition to the advice before, when you are done, you will have a group of dots. Ideally, you will have one single dot instead of ten widely spaced.
Pete

December 5, 2012, 09:37 PM	#6
darkgael Senior Member Join Date: February 9, 2006 Location: Homes in Brooklyn, NY and in Pennsylvania. Posts: 5,473	Y What he said ^^^^. Add this idea. Instead of a snap cap, put a sharpened lead pencil into the barrel. Full length wooden pencil with a full eraser. Drop it in through the muzzle. The eraser should rest against the breech/firing pin hole. Stand so that the point of the pencil is about 1/2" from the paper. When you dry fire, the firing pin will pop the pencil forward, leavingma dot on the paper In addition to the advice before, when you are done, you will have a group of dots. Ideally, you will have one single dot instead of ten widely spaced. Pete __________________ “Auto racing, bull fighting, and mountain climbing are the only real sports ... all others are games.” Ernest Hemingway ... NRA Life Member Last edited by darkgael; December 5, 2012 at 10:26 PM.