The Firing Line Forums - View Single Post

cw308 · June 17, 2012, 07:49 PM

The rifle is a Remington 700 LTR 308 Cal. When removing the barrel and action from the stock, I noticed horizontal rub marks on the sides of the barrel between the lug and the action screw. Which matches lines on the aluminum bedding block. I was thinking of slightly grinding some of the bedding away and bedding with Devcon 10110 plastic steel puddy. Has anyone out there bed a HS precision stock or had this problem. Chris

June 17, 2012, 07:49 PM	#1
cw308 Senior Member Join Date: September 2, 2010 Location: Plainview , Long Island NY Posts: 3,863	Bed a HS Precision Stock The rifle is a Remington 700 LTR 308 Cal. When removing the barrel and action from the stock, I noticed horizontal rub marks on the sides of the barrel between the lug and the action screw. Which matches lines on the aluminum bedding block. I was thinking of slightly grinding some of the bedding away and bedding with Devcon 10110 plastic steel puddy. Has anyone out there bed a HS precision stock or had this problem. Chris