I thought you could get extensions for a rock chucker to do 50. Still the RCBS dies are $180+ just for the dies. The advantage over the lee setup is that lee uses 1 144 dies and everyone else uses 1 1/2 dies. So if you want a nice neck sizing die, you are out of luck with the lee setup. But then most of those dies are $200+
Someone does make a bushing to allow using lee 1 1/4 dies in a standard 1 1/2 threaded press. The lee dies are about $80 for the 2 dies, still the cheapest way to go.
John
|