The Firing Line Forums - View Single Post

golfnutrlv · December 15, 2012, 12:03 PM

Rebs,

Here you go: Understand, load data used at readers risk. Verify in your rifle...

Lake City Brass, headstamp 11 mostly
25.8 Gr H335, loaded to 2.24 Inches
Winchester or CCI small rifle primer (Have not noticed a difference)

1:9 twist, 16" barrel. I run a Vortex 1-4x24 power scope.

This load is actually .1 gr above the max in the Sierra manual, but is below max in the Speer manual. I have never had a pressure issue. No bulged out primers, and has functioned flawlessly in my AR.

December 15, 2012, 12:03 PM	#9
golfnutrlv Senior Member Join Date: November 5, 2008 Location: Spokane, WA Posts: 1,347	Rebs, Here you go: Understand, load data used at readers risk. Verify in your rifle... Lake City Brass, headstamp 11 mostly 25.8 Gr H335, loaded to 2.24 Inches Winchester or CCI small rifle primer (Have not noticed a difference) 1:9 twist, 16" barrel. I run a Vortex 1-4x24 power scope. This load is actually .1 gr above the max in the Sierra manual, but is below max in the Speer manual. I have never had a pressure issue. No bulged out primers, and has functioned flawlessly in my AR. __________________ ΜΟΛΩΝ ΛΑΒΕ VIGILIA PRETIUM LIBERTATIS "The price of liberty is vigilance" America is at an awkward stage. It's too late to work within the system, but too early to shoot the bastards.