View Single Post
Old May 6, 2008, 01:45 PM   #4
30Cal
Senior Member
 
Join Date: December 3, 2002
Posts: 1,264
Varget is about as short as they come for extruded powders and is the best for consistancy. 0.5grs is quite a bit of variation; and by that I mean that your measure should be able to deliver more uniform drops than that. 0.2-0.3grs would be pretty typical and will deliver top knotch accuracy at short range (300yds and less).

The uniformity of your drops is directly related to how smoothly and uniformly you operate your powdermeasure. Haphazard operation will give you haphazard charge uniformity.

FWIW, most reloading scales are accurate to within 0.1grs.
30Cal is offline  
 
Page generated in 0.03618 seconds with 8 queries